UNIVERSAL TESTING MACHINE
Product from Thailand
Universal Testing Machine :
STT-TS500 - 10S
STT-TS500 - 10S
Machine Features
Capacity: 1000 kgf (10 kN ) (Tension-Compression
Applications: Rubber, Plastics , Textile, Fabric, Composite Materials
Driver: Screw type (Servo motor& Gear )
Servo motor: 400W/3000 rpm
Ball Screw: 32 x 10mm.: Single Column
Rigid frame: Frame stiffness ~530 N/μm
Frame maximum load capacity 9,000 kgf (90kN)
Safety: Limit switch for over stroke limit & Emergency stop switch
Power supply: 220V/AC220V/AC
Measurement Unit: SI , Metric , English
Force units: kN, N, cN, kgf, gf, lbf. (Selectable )
Accuracy: Conforms to JIS B7721, ISO 7500-1, BS1610
DIN51221 Class 1, and ASTM E4 , EN 10002-2 Grade 1.0
Environmental: Operate temperature 0-40° C,Relative Humidity 20 ~ 80 %
Others: ISO 17025 Calibration Certificate
Operation Manual Operating training
Force measurement system
Precision Load cell: Full scale out 2.0 ± 0.02 mV/V (products of Europe),Threaded M36x1
Load Amplifier and reader card: 23 bit
Position detection: Rotary encoder 1000 Pluse&Encoder Amplifier and counter card 24 bit
Data sampling rate: 400 Hz
Test force measurement: 1/500000 of load cell rate capacity
Accuracy: Conforms to ISO 7500-1 Class 1Or ASTM E4 Grate 1.1
Overload capability: 120% of load cells without damage
Software : QC Check V-4.0
Test mode:
Constant load control
Strain rate constant control
Stress rate constant control
Constant speed control
Load set control
Step test control
Max-Min. set value control
Application:
Load Cell Installation size 4 can be used without recalibration
Tension test (Single/Cycle)
Compression / Bending , Flexural Bending test , Plunger test
Peeling test (Fix / Sliding) , Shear test
Coefficient of Friction Tester (COF)
Spring test ,Bonding test
Brinell Hardness test
Automatic load Calibrate & Balance
Automatic Extensometer Calibrate & Balance
Test mathod setting program no limit
Report design and print directly from the program
Control panel :Start Up-Down,Positional jog Up-Down ,
Graph:
Display the real-time
Stress – Strain,Load – Stoke,Stress – Time,Stroke - Time
Load - Time,Graph 4 Quarter
Load- Elongation / Auto range etc.
Universal Testing Machine :
STT-TS500 - 20
STT-TS500 - 20
Machine Features
Capacity: 2,000 kgf (20 kN ) (Tension-Compression)
Applications: Metallic materials,Plastics, Textile, Fabric, Composite materials
Driver: Screw type (Servo motor& Gear )
Servo motor: Servo motor 0.75 kW
Ball Screw: Diameter 25 mm. lead 10 mm.
Rigid frame: Frame stiffness ~1200 N / μm,max capacity 22,000 kgf (220 kN)
Safety: Limit switch for over stroke limit & Emergency stop switch
Power supply: 220 VAC 50 Hz
Measurement Unit: SI , Metric , English
Force units: kN, N, cN, kgf, gf, lbf. (Selectable )
Accuracy: Conforms to JIS B7721, ISO 7500-1, BS1610 Class 1
Environmental: Operate temperature 0-40° C,Relative Humidity 20 ~ 80 %
Others: ISO 17025 Calibration Certificate
Operation Manual Operating training
Force measurement system
Precision Load cell: Full scale out 2.0 ± 0.02 mV/V (products of Europe),Threaded M36x1
Load Amplifier and reader card: 23 bit
Position detection: Rotary encoder 1000 Pluse&Encoder Amplifier and counter card 24 bit
Data sampling rate: 400 Hz
Test force measurement: 1/500000 of load cell rate capacity
Accuracy: Conforms to ISO 7500-1 Class 1Or ASTM E4 Grate 1.1
Overload capability: 120% of load cells without damage
Software : QC Check V-4.0
Test mode:
Tension test & Compression test
Constant load control
Strain rate constant control
Stress rate constant control
Constant speed control
Cycle test (Tension&Compression)
Shear test (Up-Down)
Peeling test (Fix / Sliding)
Bending test
Step test control
Coefficient of Friction Tester (COF)
Plunger test
Visualized Step mode method
Brinell Hardness test (3000 kgf)
Application:
Load cell installation 4 sizes can be used without recalibration
Automatic load Calibrate & Balance
Automatic extensometer Calibrate & Balance
Test method setting program(Test speed,Stress rate,Strain rate,Sample information,Data processing etc.) record and run no limit
Report design (select data) and print directly from the program
Control panel :Start Up-Down,Positional jog Up-Down
Test data export or applications ,Excel ,Text file, PDF
Graph:
Stress – Strain,Load –Elongation ,Load-Time,Strain - Time
Stress-Time,Elongation-Time etc.
Universal Testing Machine :
STT-TS500 - 50
STT-TS500 - 50
Machine Features
Capacity: 5,000 kgf (50 kN ) (Tension-Compression)
Applications: Metallic materials,Plastics, Textile, Fabric, Composite materials
Driver: Screw type (Servo motor& Gear )
Servo motor: Servo motor 1.5 kW
Ball Screw: Diameter 32 mm. lead 10 mm.
Rigid frame: Frame stiffness ~1300 N / μm,max capacity 22,000 kgf (220 kN)
Safety: Limit switch for over stroke limit & Emergency stop switch
Power supply: 220 VAC 50 Hz
Measurement Unit: SI , Metric , English
Force units: kN, N, cN, kgf, gf, lbf. (Selectable )
Accuracy: Conforms to JIS B7721, ISO 7500-1, BS1610 Class 1
Environmental: Operate temperature 0-40° C,Relative Humidity 20 ~ 80 %
Others: ISO 17025 Calibration Certificate
Operation Manual Operating training
Force measurement system
Precision Load cell: Full scale out 2.0 ± 0.02 mV/V (products of Europe),Threaded M36x1
Load Amplifier and reader card: 23 bit
Position detection: Rotary encoder 1000 Pluse&Encoder Amplifier and counter card 24 bit
Data sampling rate: 400 Hz
Test force measurement: 1/500000 of load cell rate capacity
Accuracy: Conforms to ISO 7500-1 Class 1Or ASTM E4 Grate 1.1
Overload capability: 120% of load cells without damage
Software : QC Check V-4.0
Test mode:
Tension test & Compression test
Constant load control
Strain rate constant control
Stress rate constant control
Constant speed control
Cycle test (Tension&Compression)
Shear test (Up-Down)
Peeling test (Fix / Sliding)
Bending test
Step test control
Coefficient of Friction Tester (COF)
Plunger test
Visualized Step mode method
Brinell Hardness test (3000 kgf)
Application:
Load cell installation 4 sizes can be used without recalibration
Automatic load Calibrate & Balance
Automatic extensometer Calibrate & Balance
Test method setting program(Test speed,Stress rate,Strain rate,Sample information,Data processing etc.) record and run no limit
Report design (select data) and print directly from the program
Control panel :Start Up-Down,Positional jog Up-Down
Test data export or applications ,Excel ,Text file, PDF
Graph:
Stress – Strain,Load –Elongation ,Load-Time,Strain - Time
Stress-Time,Elongation-Time etc.
Universal Testing Machine :
STT-TS501 - 100
STT-TS501 - 100
Machine Features
Capacity: 10,000 kgf (100 kN ) (Tension-Compression)
Applications: Metallic materials,Plastics, Textile, Fabric, Composite materials
Driver: Screw type (Servo motor& Gear )
Servo motor: Servo motor 2 kW (Servo motor& Gear ): Tension and compression range 1450 mm.(table to cross yoke)
Ball Screw: Diameter 40 mm. lead 10 mm.
Rigid frame: Frame stiffness ~1300 N / μm,max capacity 22,000 kgf (220 kN)
Safety: Limit switch for over stroke limit & Emergency stop switch
Power supply: 380 V/AC Or 220 VAC 50 Hz
Measurement Unit: SI , Metric , English
Force units: kN, N, cN, kgf, gf, lbf. (Selectable )
Accuracy: Conforms to JIS B7721, ISO 7500-1, BS1610 Class 1
Environmental: Operate temperature 0-40° C,Relative Humidity 20 ~ 80 %
Others: ISO 17025 Calibration Certificate
Operation Manual Operating training
Force measurement system
Precision Load cell: Full scale out 2.0 ± 0.02 mV/V (products of Europe),Threaded M36x2
Load Amplifier and reader card: 24 bit
Position detection: Rotary encoder 1000 Pluse&Encoder Amplifier and counter card 24 bit
Data sampling rate: 400 Hz
Test force measurement: 1/500000 of load cell rate capacity
Accuracy: Conforms to ISO 7500-1 Class 1Or ASTM E4 Grate 1.0
Overload capability: 120% of load cells without damage
Software : QC Check V-4.0
Test mode:
Tension test & Compression test
Constant load control
Strain rate constant control
Stress rate constant control
Constant speed control
Cycle test (Tension&Compression)
Shear test (Up-Down)
Peeling test (Fix / Sliding)
Bending test
Step test control
Coefficient of Friction Tester (COF)
Plunger test
Visualized Step mode method
Brinell Hardness test (3000 kgf)
Application:
Load cell installation 4 sizes can be used without recalibration
Automatic load Calibrate & Balance
Automatic extensometer Calibrate & Balance
Test method setting program(Test speed,Stress rate,Strain rate,Sample information,Data processing etc.) record and run no limit
Report design (select data) and print directly from the program
Control panel :Start Up-Down,Positional jog Up-Down
Test data export or applications ,Excel ,Text file, PDF
Graph:
Stress – Strain,Load –Elongation ,Load-Time,Strain - Time
Stress-Time,Elongation-Time etc.
Universal Testing Machine :
STT-TS501 - 300
STT-TS501 - 300
Machine Features
Capacity: 30,000 kgf (300 kN ) (Tension-Compression)
Applications: Metallic materials,Plastics, Textile, Fabric, Composite materials
Driver: Screw type (Servo motor& Gear )
Servo motor: Servo motor 4.5 kW (Servo motor& Gear ): Tension and compression range 1780 mm.(table to cross yoke)
Ball Screw: Diameter 63 mm. lead 10 mm.
Rigid frame: Frame stiffness ~2000 N / μm,max capacity 50,000 kgf (500 kN)
Safety: Limit switch for over stroke limit & Emergency stop switch
Power supply: 380 V/AC Or 220 VAC 50 Hz
Measurement Unit: SI , Metric , English
Force units: kN, N, cN, kgf, gf, lbf. (Selectable )
Accuracy: Conforms to JIS B7721, ISO 7500-1, BS1610 Class 1
Environmental: Operate temperature 0-40° C,Relative Humidity 20 ~ 80 %
Others: ISO 17025 Calibration Certificate
Operation Manual Operating training
Force measurement system
Precision Load cell: Full scale out 2.0 ± 0.02 mV/V (products of Europe),Threaded M42x2
Load Amplifier and reader card: 24 bit
Position detection: Rotary encoder 1000 Pluse&Encoder Amplifier and counter card 24 bit
Data sampling rate: 400 Hz
Test force measurement: 1/500000 of load cell rate capacity
Accuracy: Conforms to ISO 7500-1 Class 1Or ASTM E4 Grate 1.0
Overload capability: 120% of load cells without damage
Software : QC Check V-4.0
Test mode:
Tension test & Compression test
Constant load control
Strain rate constant control
Stress rate constant control
Constant speed control
Cycle test (Tension&Compression)
Shear test (Up-Down)
Peeling test (Fix / Sliding)
Bending test
Step test control
Coefficient of Friction Tester (COF)
Plunger test
Visualized Step mode method
Brinell Hardness test (3000 kgf)
Application:
Load cell installation 4 sizes can be used without recalibration
Automatic load Calibrate & Balance
Automatic extensometer Calibrate & Balance
Test method setting program(Test speed,Stress rate,Strain rate,Sample information,Data processing etc.) record and run no limit
Report design (select data) and print directly from the program
Control panel :Start Up-Down,Positional jog Up-Down
Test data export or applications ,Excel ,Text file, PDF
Graph:
Stress – Strain,Load –Elongation ,Load-Time,Strain - Time
Stress-Time,Elongation-Time etc.
Universal Testing Machine : NRI-TS501 - 300
Pneumatic Side-Action Grips
